ASTM A815 WPS32205 Duplex Stainless Steel Return Bend Duplex 2205 Pipe Fitting 180° Bend

ASTM A815 WPS32205-S Duplex Stainless Steel Pipe Fittings Duplex 2205 180 Degree Return Bend

180° Return Bend (also known as a Hairpin Bend or U-Bend) is a pipe fitting that reverses the flow direction by 180 degrees. Unlike a standard 180 degree long radius elbow, a return bend has a specific "return" geometry where the two ends are parallel to each other but facing opposite directions. Function: As a space-saving, high-integrity connector in heat exchanger tube bundles, pipe racks, steam systems, and expansion loops, where reversing the pipe route without using multiple separate elbows is mechanically and economically superior.

Chemical Composition % of ASTM A815 WPS32205 Duplex Stainless Steel Return Bend Duplex 2205 Pipe Fitting

Mechanical Properties of ASTM A815 WPS32205 Duplex Stainless Steel Return Bend Duplex 2205 Pipe Fitting

Inspection & Testing Requirements (per ASTM A815)

To ensure quality, the following tests are typically performed:

• Chemical Analysis and Tensile Testing (per heat).

• Hardness Test (HRC or HBW) – typically limited to ≤ 28 HRC for sour service.

• Ferrite Content Measurement – must be between 35% and 65% as per the standard practice.

• Hydrostatic Test or Nondestructive Examination (NDE) – such as dye penetrant (PT) or radiographic testing (RT) to check for surface or volumetric defects.

• Intergranular Corrosion Test – per ASTM A262 (Practice E) to ensure proper sensitization resistance.

Application

This fitting is heavily used in industries where space is constrained, and piping needs to be routed back in a compact loop:

• Heat Exchangers (as U-tubes or return bends in shell-and-tube exchangers).

• Oil & Gas (offshore platforms, subsea manifolds, and flowlines) where sour gas (NACE MR0175/ISO 15156) is handled.

• Chemical/Petrochemical Processing (handling acetic acid, formic acid, and hot chloride solutions).

• Marine Engineering (seawater cooling systems).

• Pulp & Paper (digester systems).

ASTM A815 duplex stainless steel return bend

Duplex 2205 pipe fitting 180° bend

WPS32205 stainless steel return bend

ASTM A815 WPS32205 Duplex Stainless Steel Return Bend Duplex 2205 Pipe Fitting 180° Bend Images